Energy Efficient Insulated Crawl Space Foundation Vent Cover Installs Easily

Sized to fit a typical concrete block opening.

Our vent fits a rough opening of minimum 14 1/2 inch x 7 inch.

The overall face plate size is 19 1/2 inch x 10 inch. Threaded steel rods are 9" long.

Proper venting of homes with a crawl space foundation has long been a challenge for homeowners.

Proper crawl space foundation ventilation prevents the buildup of mold and moisture.

Most homes have fixed vents that limit airflow in warmer weather and that do not seal well or at all in winter.

Our vent provides ventilation, and the insulated panel can be installed during the heating season. This allows you to add some heat into your crawlspace foundation to keep your pipes and your floors from freezing.

The vent is insulated and serviced from the outside, so there is no need to enter the crawlspace foundation.

Our vent can be retrofitted to existing homes, is easily serviced, easily insulated, and easily adapted to meet the changing seasons.

The dual-mode flexibility of our Crawl Space Foundation Vent Cover provides maximum ventilation in warm months and maximum insulation in cold months.

Nearly 19 million homes in the United States have crawl space foundations where homeowners face these ventilation dilemmas every year.

This vent is the only product available that help homeowners solve these problems.

Faceplate is made of heavy duty, durable, gray color ABS plastic. No painting needed (but can be painted if desired). Stainless steel screen is rodent proof.

Net Free Area

Our vents have a 80% free area = 61 square inches free air opening per vent.

Face Plate

Summer Stainless Steel Screen Door

Winter Door/Sealer Plate

All related Installation Hardware!

Homeowners with homes built on crawlspace foundations, our Crawl Space Foundation Vent Cover was designed specifically for you.

Our Crawl Space Foundation Vent Cover can be retrofitted into existing homes or installed into new homes.

Industry experts love this new patented product.

Our Crawl Space Foundation Vent Cover allows 50% more free air flow during the non-heating season and also has a heavy duty stainless steel screen that keeps the vermin from living in your crawl space foundation/home.

Stop wasting your heating dollars get rid of your old vents install our Crawl Space Foundation Vent Covers.

Our vent can be installed, insulated and sealed from the outside of your home.

High quality affordable product.

Increases crawl space foundation air flow by over 50%.

Saves money by helping to reduce heat loss through crawlspace foundation vent covers.

Aids and assists in reducing moisture.

Keeps rodents and mice out.

Insulate your crawlspace foundation from outside your home (if desired).

Helps prevent pipes from freezing.

Easy to use: open and close from the exterior.

Easy to clean.

Heavy duty stainless steel vermin-proof screen.

CRAWLSPACE FOUNDATION VENT COVER FRONT VIEW ASSEMBLY

Includes:

Face Plate,

Summer door with heavy duty stainless steel screen to keep vermin out,

Winter door/sealer plate that can be installed during heating season if desired,

Threaded steel rods screw through the faceplate,

Backer Bar,

2 wing nuts to draw up and affix the face plate firmly against the foundation,

2 knurled hex nuts placed directly behind the face plate on the threaded rods,

2 knurled nuts which are used to hold the winter door and/or the summer door depending upon the season.

Front view of the crawl space foundation vent cover.

The crawl space foundation vent cover face plate and summer door frames are made out of heavy duty UV protected ABS plastic.

The color is dove gray and can be painted with latex paint by the customer if they so desire.

Heavy duty stainless steel vermin-proof for durability and to keep vermin out of your crawl space foundation.

Change over to winter is simple!

Remove ventilation screen.

Insert the winter door/insulation plate into the face plate and tighten the two nuts.

Winter foundation vent cover installs from the outside - no need to enter crawlspace foundation.

Rear view shows backer bar, threaded rods and knurled nuts hold the faceplate into the foundation vent opening.

Threaded rods secure the face plate to the backer bar.

Simple to Install!

Crawl Space Foundation Vent Cover Installation Video

Sill Plate Not Flush Video How To

Cement Block Obstruction Video How To

Versatility of the Crawl Space Vent Video How To

	Check out our recent customer feedback: "We fully believe that the Crawl Space Foundation Vent would be a great asset to any residence with a crawlspace foundation. Doing heating and cooling, we are in many crawlspace foundations. Crawlspaces without good ventilation have been known to cause some hazardous and then expensive situations. Using this product can be beneficial in many ways in our line of work. Better yet, good ventilation is much safer for our employees and the homeowners. Having installed these vents for six years, we can see what a great product this is, and every homeowner with a crawlspace foundation should consider using it." A-Tech Heating & Cooling, Inc. "When I first saw your crawlspace foundation vent covers, I thought that they were the best vents that I had ever seen. Plus the fact that I could open and close and insulate my vents all from the outside, was exactly what I wanted. I never have to crawl around my crawlspace foundation again! Now that my vents are installed, they look great and I can feel the air flowing from my crawlspace foundation. Thank you for a great product." --Eugene F., Houghton Lake, MI Click here for more customer feedback...