AVAILABLE KITS:
Note: All kits include durable stair cover and weatherstripping. All kits easily install in minutes with no tools.
Good
Better
Includes stair cover and reflective shield
(same as Best Kit without fiberglass)
Reflective Aluminum Shield slips over stair cover and seals insulation. It also provides a reflective surface that saves energy and reflects away heat. The Reflective Aluminum Shield blocks up to 97% of radiant heat!
The gap around your attic stairway is like an open window. In the cold winter your heat flows right out and cold air flows right in; and in the summer your air-conditioning flows right out and the heat flows right in!
Other inferior products that rest on the attic floor (which may or may not exist) can require extensive renovations to work - these hidden installation costs can cost you hundreds of $$$!
Some other inferior products fail to provide a seal that resists air leakage. Insulation alone cannot reduce air leakage - you must reduce the air transfer between the conditioned and the unconditoned areas. Building and Energy Codes require this!
COMPARE INSULATING VALUE - OUR R-50 INSULATION KIT PROVIDES THE HIGHEST INSULATION LEVEL OF ANY ATTIC STAIR COVER AVAILABLE! OR IF YOU PREFER YOU CAN EASILY ADD YOUR OWN DESIRED AMOUNT OF INSULATION!
Battic Door was profiled by Builder magazine at the 2013 NAHB International Builders Show
Battic Door was profiled on DIY Channel's Your Best Built Home
The only stair cover kit available that meets the 2009 International Energy Conservation Code (IECC) and the 2009 International Residential Code (IRC) - used in all 50 states and most jurisdictions!
A MINIMUM OF R-30 to R-49+ is NOW REQUIRED FOR NEW CONSTRUCTION AND RENOVATION!
And only WE have it!
2009 IECC Section 402.2.3 and 2009 IRC Section N1102.2.3 reads: "Access hatches and doors. Access doors from conditioned spaces to unconditioned spaces (e.g.,
attics and crawl spaces) shall be weatherstripped and insulated to a level equivalent to the insulation on the
surrounding surfaces.
"