What size Fireplace Draft Stopper do I need?

Brick Fireboxes - Large Fireplace Plug Chimney Draft Stopper

The rectangular, or masonry model, of the Fireplace Plug is designed for use in conventional wood burning fireplaces. If you are not sure which model of Fireplace Plug is right for your fireplace use a flashlight to ensure whether your damper is circular or rectangular. If your damper is rectangular this is correct model for you.

This original model of the Fireplace Plug has been available for over 10 years . During this time thousands of homeowners across North America have enjoyed the added comfort and cost saving benefits of this innovative product.

The Fireplace Plug is manufactured using a proprietary 14 ml. polyurethane material which is very robust despite the harsh fireplace environment. This material is specially formulated to resist pinholes from corrosive creosote as well as extreme weather fluctuations. The Fireplace Plug has undergone extensive safety testing to ensure it poses no danger in case you accidentally start a fire without first removing the product, it is deemed to be a passive product. If you do start a fire (despite seeing the orange warning label, and, or the Fireplace Plug and prop device) the plug will melt, then drop down and smother the fire. Unfortunately, your Fireplace Plug will be ruined.

Elastic loops attach the telescoping prop device to the Fireplace Plug insuring easy installation. The prop allows you to position the plug without having to touch the sooty fireplace interior.

LOW COST - EASY INSTALLATION - SIMPLE REMOVAL - AMAZING RESULTS

Our Original Large DraftStopper is an inflatable urethane plug measuring 38" x 16" inflated.
It is quickly and easily installed into any masonry fireplace just below the damper. This size will fit any rectangular damper.

Here are 3 tips that should assist you with a fast and easy install for our large plug:

1. Lower the air pressure so the plug is not hard. If you put in too much air it will become stiff and could create gaps. The plug should seal all gaps and conform to the shape of the fireplace.

2. Lower the pole and install in a "V" not a "^". After you insert it tuck the front and back up. Then add a little more air so it seals.

3. Please note that it is not always necessary to make a slit to accommodate the damper handle. Trial fit the plug first without making any slit for the damper handle. If the damper handle is in the way, open the damper to move the handle, or remove the handle temporarily.

Metal Fireboxes - Round Fireplace Plug Chimney Draft Stopper

The round, or metal model, of the Fireplace Plug is designed for use in metal fireboxes (ie: zero-clearance). If you are not sure which model is right for your fireplace, use a flashlight to ensure whether your damper is circular or rectangular. If your damper is circular this is the correct model for you. These fireplaces are usually found in multi family dwellings such as Condo's and Townhouses.

The smaller oval shaped Fireplace Plug was manufactured to meet a growing demand from our customers. This model of the Fireplace Plug has been on the market for only a few years but demand continues to increase and the feedback is very positive.

The metal firebox model of the Fireplace DraftStopper is designed to curl around a damper handle and still provide you with an extremely effective seal.

Elastic loops attach the telescoping prop device to the Fireplace Plug insuring easy installation. The prop allows you to position the plug without having to touch the sooty fireplace interior.

LOW COST - EASY INSTALLATION - SIMPLE REMOVAL - AMAZING RESULTS

Our New Small DraftStopper is an inflatable urethane plug measuring 18" diameter inflated.
It is quickly and easily installed into any metal or zero-clearance fireplace just below the damper. This size will fit any round damper.